Intravenous (IV) Technician Certification Practice Exam

These questions are part of the practice quiz. Start practicing

• What does the term carcinogenic refer to?
• What does EEC stand for in the context of sterile compounding?
• Which of the following is NOT typically included in personal protective equipment?
• Which term defines the transfer of an infecting agent through direct physical contact?
• What is a common characteristic of a gooseneck faucet?
• What is the fundamental goal of targeted therapy?
• What is defined as a critical site in sterile compounding?
• Droplet contact transmission occurs primarily through which of the following?
• What is the tapered neck of an ampule designed for?
• When conducting an ISO cleanroom classification test, which parameter is prioritized?
• Which physical condition prevents IV technicians from working in a sterile compounding facility?
• What is the primary function of primary IV tubing?
• Which scenario best describes when sterile techniques must be employed in IV compounding?
• Which cleaning product is appropriate for cleaning the horizontal laminar airflow hood?
• What does the term "septicemia" refer to?
• What method is used in aseptic processing for medical products?
• Where should a designated sink for septic handwashing be located?
• What is a key characteristic of vesicants?
• How does tonicity affect cells in the human body?
• What does the term "precipitates" refer to in chemistry?
• Alkylating agents are used to target which biological component?
• What can be a consequence of incompatible additives during compounding?
• What is the primary measure of air cleanliness in ISO Class systems?
• Preservative-free products should be disposed of after what maximum time period?
• In which scenario would an EEC be used?
• In a Laminar Airflow Workbench, what does the HEPA filter do?
• What is the purpose of a biological safety cabinet?
• What is a key feature of the ADD-VANTAGE BAG?
• What type of antiseptic is Povidone iodine classified as?
• What is the primary purpose of a buffer solution in IV preparation?
• What is the primary goal of filtration sterilization?
• Over what period is an LVP commonly administered?
• What does LVP stand for in IV therapy?
• What factors influence bacterial survival?
• What term is used to describe a source that harbors an infecting agent?
• What is a characteristic of airborne transmission?
• What is the main benefit of a single-dose vial?
• What is the main function of vented dispensing pins in IV systems?
• Which of the following is NOT considered a packaged sterile item?
• What is the function of a blower in a sterile compounding facility?
• An IV-based solution typically has a volume of how much?
• How long are the specific vial and bag systems stable for, if unopened?
• What is an example of a vehicle in vehicle transmission?
• Which of the following is an important aspect of maintaining personal hygiene in a sterile environment?
• What does the acronym CSP stand for?
• What is teratogenic effect associated with?
• What is a nomogram used for?
• What does PEC stand for in sterile compounding?
• What is ISO Class 5 in the context of IV preparation?
• What requirement is necessary when using a Biological Safety Cabinet for preparing sterile products?
• How should walls and ceilings in the pharmacy be maintained?
• What is the recommended cleaning method for supplies such as sterile water in the anteroom?
• Which of the following ISO classes would have a higher allowable particle count?
• What defines targeted therapy in cancer treatment?
• What does sterile compounding personnel need to do with the specific vials and IVPB systems?
• Which type of transmission uses vectors, such as insects?
• What are anti-microtubule agents primarily used for?
• How is heat sterilization typically achieved in compounding?
• What is the standard recapping method for a filled syringe?
• What is a common method of sterilization used in compounding pharmacies?
• What is an important consideration when compounding sterile preparations?
• What is the purpose of a Total Parenteral Solution (TPN)?
• What does the ADD-A-VIAL system feature?
• Which situation requires a complete aseptic handwashing?
• What is considered a violation of physical appearance in sterile compounding?
• What is the primary function of chemotherapeutic antibiotics?
• What characterizes a High-Risk Compounded Sterile Product?
• What task must be completed after the hood cleaning procedure?
• How should ampules be handled to avoid contamination?
• What is a distinguishing feature of pathogenic organisms?
• How far inside the hood must an IV technician work to ensure sterile airflow?
• In which situation is "Immediate use CSP" intended to be administered?
• Why might some IV solutions cause discomfort when injected?
• What error may occur during the prescribing process?
• What is hypochlorite commonly used for?
• What does osmolality refer to?
• Why is it important to adhere to ISO Class standards in medical settings?
• What is considered the most common source of microbial contamination in compounded sterile preparations (CSPs)?
• What is osmotic pressure necessary for?
• In ISO standards, what does “µm” stand for?
• What is a characteristic of gram-positive bacteria?
• Hormone therapy primarily targets which aspect of cancer cells?
• Which factor can contribute to a medication error during administration?
• What type of transmission involves droplets traveling about 3 feet from one person to another?
• What is one limitation of using a Compounding Aseptic Containment Isolator (CACI)?
• What is necessary for hood cleaning wipes to work effectively?
• What is the maximum particulate matter allowed in an ISO Class 7 cleanroom?
• What does touch contamination potentially lead to for patients?
• Why is the diameter of a needle significant in IV procedures?
• Which characteristic best describes an IVPB solution?
• What effect do anti-microtubule agents have on cancer treatment?
• What is the proper technique for cleaning the work surface of the hood?
• Which alcohol is commonly used in healthcare settings for disinfection?
• Which class of drugs is designed to stop replication in specific DNA cells?
• What is the role of aseptic techniques in a healthcare setting?
• What size membrane filters are generally used to sterilize solutions prepared with nonsterile ingredients?
• Miasmas are defined as what?
• Which of the following can serve as an infecting agent?
• What type of equipment is referred to as PPE?
• What does osmolarity measure in a solution?
• Which factor increases the likelihood of infection during IV procedures?
• What is a potential hazard of using contaminated syringes?
• Most sterile compounds prepared in the pharmacy fall into which risk levels?
• What is a key characteristic of the Laminar Airflow Workbench (LAFW)?
• What is one example of vehicle transmission of infection?
• What is meant by the term iso-osmotic?
• Which type of medication container lacks preservatives?
• Mitotic inhibitors are used to achieve what effect on cells?
• What is the primary goal of a cleanroom?
• What is the primary action of anti-metabolite medications?
• What is the purpose of the line of demarcation in a cleanroom environment?
• What is a sticky mat used for in a cleanroom environment?
• What are anti-neoplastic medications designed to do?
• What is the correct order of garbing for sterile compounding?
• What is the purpose of a filter needle?
• What is the primary benefit of using a pump for transferring fluids?
• What is Chloroxylenol commonly used for?
• When should sterile foam with 70% isopropyl alcohol be used?
• What does the "zone of turbulence" refer to in a compounding hood?
• What is the definition of a micropore?
• What is the recommended action for managing weeping sores in a sterile compounding environment?
• Which bacteria are typically considered beneficial and nonpathogenic?
• What is the pH range of standard IV-based solutions like sodium chloride and lactated Ringer's?
• What should be avoided when preparing High-Risk CSPs?
• What is an important factor when determining the cleanliness of a controlled environment?
• Cytotoxic medications have what primary effect on cancer cells?
• Which of the following is a requirement of the United States Pharmacopeia (USP)?
• What distinguishes macrodrip IV tubing?
• What is the maximum particle count per cubic meter in ISO Class 5?
• What is the purpose of using sterile water as a preliminary cleaning agent for the hood?
• What is the particle matter limit for ISO Class 8 environments?
• Which type of cabinet is specifically used for handling hazardous compounds?
• What type of IV administration device is typically utilized for precise dose delivery?
• What does BSA stand for in the context of chemotherapy?
• What class of air quality must the Direct Compounding Area maintain?
• What is the maximum volume that can be programmed into a repeater pump for fluid transfer?
• What is the significance of maintaining osmotic equilibrium in IV solutions?
• When preparing for the compounding process, which two items must be verified for accuracy?
• Which of the following is NOT acceptable for septic hand washing?
• What does the needle gauge refer to?
• What does hormone therapy do in relation to cancer cells?
• What constitutes a medication error according to the National Coordinating Council?
• What type of treatment is described as intended for curing the patient?
• What is the purpose of a rubber stopper in a Mix-O-Vial?
• What is the maximum particulate matter allowed in ISO Class 7?
• The preparation of which type of solution poses a higher risk and involves multiple injections?
• What is the primary effect of an immunosuppressive drug?
• What is the definition of a mutagen in genetics?
• What material is recommended for mopping floors in a clean room?
• Which diluents are most frequently utilized by an IV technician?
• What is the main purpose of the pre-filter in a Biological Safety Cabinet (BSC)?
• Which activity is classified as a Medium Risk Compounded Sterile Product?
• What is a key characteristic of the 6 inch zone in sterile compounding?
• What are precipitates and particulate matter in a compounded solution?
• Which type of air flow system is most effective for preparing hazardous drugs?
• Which type of cleaning soap is generally used in pharmacies for routine handwashing?
• What kind of wipes should be used for cleaning the hood?
• What is the primary purpose of rinses, gels, or foams used before putting on PPE?
• What are IVA SEALS used for in IV preparation?
• Adjuvant chemotherapy is typically prescribed for what purpose?
• What are considered pathogenic contaminants?
• Which method of handwashing is more stringent than basic handwashing?
• Palliative chemotherapy is used primarily for which type of cancer treatment?
• Which of the following is true about vesicant extravasation?
• Which of the following is true about nonpathogenic organisms?
• Which ISO Class indicates a less stringent requirement for particulate matter?
• Which of the following describes a biological safety cabinet's location requirement?
• What best describes secondary IV tubing used in administering IV medications?
• What defines a Low Risk Compounded Sterile Product (CSP)?
• Which characteristic defines an IVPB solution's use?
• In terms of cancer treatment, what defines 'palliative chemotherapy'?
• What describes a Mix-O-Vial?
• What is defined as disease-causing microorganisms?
• What condition is associated with harmful fumes known as miasmas?
• In ISO standards, which characteristic is least likely to be monitored?
• How should cleaning wipes be prepared before using them on the hood?
• Which of the following describes a common characteristic of cytotoxic medications?
• Which is a consequence associated with septicemia?
• Which cleaning method is recommended for maintaining a pharmacy's cleanroom?
• Which ISO class has a lower maximum particle count for particles of 0.5 µm and larger?
• When should a CSP be administered after preparation?
• Which action is NOT permitted in the sterile compounding process?
• What type of flow does a Large Volume Parenteral typically provide to patients?
• What defines micro drip IV tubing?
• What does Chlorhexidine gluconate help with?
• What is the function of a Compounding Aseptic Containment Isolator (CACI)?
• What is the role of a HEPA filter in a cleanroom environment?
• What is the role of topoisomerase inhibitors?
• What particle size is referred to in both ISO Class 7 and Class 8 standards?
• What two pieces of information are essential to determine the duration an IV bag will last?
• What is the significance of the particle size specified in ISO classifications?
• What is the goal of primary chemotherapy?
• What is the volume range for an IVPB solution?
• What does CAI stand for in the context of sterile compounding?
• When using a filter needle, what purpose does it serve?
• Which of the following is NOT a component of critical sites in IV administration?
• What is the literal translation of the term anteroom?
• What does a higher ISO class number typically indicate in terms of cleanliness?
• What does HVAC stand for in a pharmaceutical context?
• What is a single-dose vial?
• What does IVPB stand for?
• Which method is recommended to prevent infection during IV procedures?
• What does the expression of BSA (Body Surface Area) generally take into account?
• What is the correct order to clean a horizontal laminar airflow hood?
• What is the function of the injection port in IV tubing?
• What is "shadowing" in the context of sterile compounding?
• Why is it important to put on sterile gloves before preparing CSPs?
• Which of the following is NOT a type of hood used for sterile compounding?
• Which of the following is the most appropriate agent for primary hood cleaning?
• Which term describes the absence of bacteria and viruses in a controlled environment?
• What is the primary purpose of a sterile IPA swab?
• Which ISO class is most appropriate for environments requiring the cleanest conditions?
• What is a unique aspect of a multiple-use vial?
• What is the primary function of an immunosuppressive drug?
• What feature distinguishes a multiple-use vial?
• What safety measure should be taken when handling a broken ampule, as it poses a risk?
• What should you do if a preservative-free product is not used within 24 hours?
• Topoisomerase inhibitors disrupt which cellular function?
• What does ISO Class 5 indicate regarding air quality in a compounding environment?
• Which chemotherapy type is typically administered after surgery for tumor removal?
• What is the focus of Chapter 797 of the USP?
• In sterile compounding, what critical information must be known to solve dosage calculation problems?
• What is the primary feature of the Direct Compounding Area (DCA)?
• In vectorborne transmission, what is an example of a disease transmitted by an infected organism?
• What should be done immediately after a spill of a sterile product?
• What is the contamination zone of a sterile compounding hood known as?
• How many different motions are accounted for during human activity according to the text?
• Which of the following describes a correct practice in IV therapy?
• Chlorine is primarily known for being what type of chemical?
• What type of particles does particulate matter include?
• What is the first step when cleaning a hood?
• In which type of hood should hazardous drug chemotherapy be prepared?
• Which product is NOT designed for sterile compounding?
• Which system is specifically designed for attaching vials to IVPB units for sterile compounding?
• What are premixed parenteral products commonly used for in IV therapy?